Claas CROP TIGER 30 Fuse Box Diagram & Relay
The fuses are located behind the covers (3).
– Pull off the cover (3).
– Put the cover on the fuses.
– Fold the flap (2) upwards and screw on the
bolt (1).
Basic central electrics fuses 000 514 586 0
1 Warning flasher / ignition / +30 7.5A
2 Brake light / horn 7.5A
3 Reversing horn 7.5A
4 Warning horn / warning lights 3.0 A
5 Warning flasher / ignition / +30 7.5A
6 not used
7 Work lights, grain tank 7.5A
8 Work lights, front 7.5A
9 Headlight, right 7.5A
10 Headlight, left 7.5A
11 Position light, right 7.5A
12 Position light, left 7.5A
Work on the electrical system. Machine damage.
– Before starting work, disconnect the cable from the negative terminal first and then from the positive terminal of the battery.
– When wrk is complete, first connect the positive terminal and then the negative terminal to the battery.
– Always disconnect the cables from the alternator and battery before performing electrical welding work on the machine and the front attachment.
In order to interrupt the power supply to the machine,
loosen and remove the cable clamps (1) from the
battery.
Disconnect the battery daily after using the machine
and in case of an emergency.
Do not disconnect the battery when the diesel engine
is running.
Electric system / Electronics
Battery 12 volts, 80 Ah